General Measure ChexGo CW-60K-V User Manual page 42

Check the maximum
judgment time of the
scale
Decimal point
Maximum range
Check scale for
stability time
Stabilizing time
Zero tracking time
The system
automatically clears
zeros after power-on
Feed to shake time
Time to remove
shaking from material
Length of scale table
Maximum time on the
scale table
Material blocking time
Dynamic zero
clearance range
Is the longest judgment time in the process of weight
calibration, indicating that the weighing platform must be
stable and the zero voltage must be within the limited range
during the calibration of the empty weighing platform and the
weight calibration process. If the above conditions are not met
and the maximum judgment time is exceeded, the alarm will
be given and the weighing will fail
0 0.0 0.00 0.000 0.0000 Optional
60kg
When checking the scale, the range of weight variation is
judged to be stable within the stability range of the scale
Within this setting, the range of weight variation is judged to
be stable within the range of stability
During this time, the system data drift does not exceed the
zero tracking range
Zero clearing operation will be performed once on the scale
platform
Do not sample during this time after feeding
Do not sample during this time before discharging
1000mm/1200mm
Maximum time an item is on the scale
From the discharge photoelectric induction to the material
time, more than this time alarm
Range of zeroing of the weighing platform during the weight
checking process
-36-
让称重触手可及
Making Weighing More Accessible
Making Weighing More Accessible