General Measure ChexGo CW-60K-V User Manual page 64

➢ The sensor is obviously disturbed, such as air conditioning, air flow, etc.
method to get rid of external interference
➢ Ground shaking, vibration, such as nearby machine rotation interference, cars
passing by, etc.Treatment methods to get rid of external interference
➢ The conveyer belt is affected by viscous objects
➢ Sensor base has debris accumulation or stuck processing method to get rid of
external interference
➢ Filter coefficient set too small processing method to increase the filter coefficient
10.2.3 The display is always zero
➢ The object is light and the weight falls in the zero range. The treatment should be
resolved by resetting the "zero range".
➢ Device trace to zero.
"automatic zero tracking" item in the calibration option of the system.
➢ The sensor data cable is loose, and the contact is not good.
sensor data cable properly
10.2.4 Abnormal data display
➢ The error is too large.
➢ Product number selection error.
by clicking "Switch Product" again and selecting the corresponding companion
product number.
➢ The ambient temperature exceeds the normal operating range of the sensor. Ensure
that the ambient temperature is normal
➢ Aging or deformation of sensor components.
10.2.5 Busy alarm
➢
After the object into the material is not out of the weighing platform, and there are
objects on the weighing platform. Handling Method Adjust the feeding speed, the
material out of the weighing platform before allowing the next material on the
weighing platform.
10.2.6 Packaging error
➢ Remove too many unqualified products in time.
unqualified products in time.
10.2.7 Continuous nonconformity alarm
➢ The number of consecutive disqualifications exceeding the set value.Alarm prompt,
no need to deal with the weight check work normally.
The handling method can be solved by adjusting the
Handling Method Recalibrate the scale.
The handling method should be resolved
Solution Replace the sensor
-58-
让称重触手可及
Making Weighing More Accessible
Making Weighing More Accessible
Solution Connect the
Handling method Eliminate
Disposal