General Measure ChexGo CW-60K-V User Manual page 65

10.2.8 Excess plugging time
➢ During operation, the object stays too long at the feeding or discharging end.
Solution Check the reason for the object staying time is too long and deal with it in
time.
10.2.9 Below the minimum sampling time
➢ The object is coming off the scale too quickly in operation.
the belt of the weighing table within the detectable range.
Super maximum sampling time
10.2.10
➢ Long period of time when the object in operation is not off the scale. Check the
reason why the object is not out of the weighing table for a long time and deal with
it in time.
Overload motor load limit
10.2.11
➢ The weight of the object exceeds the maximum range by a certain amount (exceeds
the maximum weight of the motor). Handling Methods Do not weigh objects beyond
the maximum range.
Automatic zeroing failed
10.2.12
➢ 1. The current weight is out of the zero clearance range.
➢ 2. The scale is unstable.Treatment Method 1 Empty the scale table 2 Make sure the
scale is stable
Making Weighing More Accessible
-59-
让称重触手可及
Making Weighing More Accessible
Adjust the speed of