General Measure ChexGo CW-60K-V User Manual page 24

Belt speed
Standard weight
Upper limit
Lower limit value
Tare weight
Qualified culling
distance
Duration of qualified
culling
Out-of-tolerance
culling distance
Underweight culling
distance
The out-of-tolerance
culling action time
Undershoot culling
action time
Unqualified culling
distance
The time of the
unqualified culling
action
Correction factor
Total lot
Qualified batches
Weigh the speed at which the belt is running
The standard weight of the product to be checked
In the process of weight inspection, if the weighing value is
greater than the target value + the upper limit value, it will be
judged as out of tolerance
In the process of weight inspection, if the weighing value is
less than the target value-lower limit value, it will be judged as
undererror
The weight of the item's outer packaging
The distance traveled by the product from the end of the scale
to the start of the qualified culling mechanism
The duration of the qualifying cull mechanism's action
The distance traveled by the product from the end of the scale
to the start of the offset removal mechanism
The distance traveled by the product from the end of the scale
to the start of the underbalance removal mechanism
The duration of the kill mechanism's action
The duration of the underkill operation
The distance traveled from the end of the scale to the
nonconforming product after the start of the removal
mechanism
The continuous action time of the rejection mechanism for
nonconforming products (including out-of-error + undererror)
Standard no correction is 1000. Correction factor
=1000+(actual weight - test weight result)/ min indexing. That
is, if the weight test result is light, the correction factor is the
number greater than 1000, if the weight test result is heavy,
the correction factor is the number less than 1000
Total number of pieces of heavy product inspected
Number of eligible batches of products
-18-
让称重触手可及
Making Weighing More Accessible
Making Weighing More Accessible