Security; Parameter Group 43-** Unit Readouts; Component Status - Danfoss VLT Aqua Drive FC 202 Programming Manual

Programming Guide | VLT® Aqua Drive FC 202
Shows status and configuration information of the current IoT protocol.

40-9* Security

5.33.6
40-90 UUID
Default value: Size related
Setup: 1setup
Data type:
VisStr[36]
The Universal Unique Identifier (UUID) identifies this device within the network.
40-92 802.1X Port-Based Network Access Control
Default value: [0] Disabled
Setup:
All setups
Data type: Uint8
Use this parameter for setting the protocol used for network port access control using 802.1X.
Option Name
[0]* Disable
[1] Enable EAP-TLS
40-99 Protocol Status Word
Default value: 0
Setup: 1 setup
Data type: Uint32
This parameter shows the protocol status word for the drive in hex code.

Parameter Group 43-** Unit Readouts

5.34

43-0* Component Status

5.34.1
43-00 Component Temp.
Default value: 0 °C
Setup: All setups
Data type: Int8
Shows the temperature of a system component. The elements of the array reference local PCB temperature sensor measurements.
Parameter 16-31 System Temp uses all elements in this array to calculate the system temperature.
43-01 Auxiliary Temp.
Default value:
0 °C
672 | © 2024.06
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Description
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Parameter Descriptions
Range, 36 - 36
0
True
Option
–
True
Range, 0 - 0xFFFFFFFF, Array
[10]
0
True
Range, -128 - 127 °C, Array [18]
100
True
Range, -128 - 127 °C, Array [18]
AU361182657213en-002101 / 130R0338