Danfoss VLT Aqua Drive FC 202 Programming Manual page 536

Programming Guide | VLT® Aqua Drive FC 202
Option Name
[3] Pulse input 29
[4] Pulse input 33
[7] Analog input X30/11
[8] Analog input X30/12
[9] Analog input X42/1
[10] Analog input X42/3
[11] Analog input X42/5
[16] Analog input X49/1
[17] Analog input X49/3
[18] Analog input X49/5
[99] Normal feedback
[100] Bus feedback 1
[101] Bus feedback 2
[102] Bus feedback 3
24-09 Emergency Mode Alarm Handling
Default value: [0] Trip+reset, critical alarms
Setup:
2 setups
Data type: Uint8
Warranty-affecting alarms. Certain alarms can affect the lifetime of the drive. Should 1 of these ignored alarms occur while in
emergency mode, the alarms are logged and stored in the emergency-mode log.
The setting in parameter 14-20 Reset Mode is disregarded if emergency mode is active (see parameter group 24-0* Emergency
Mode).
Select an option to define the response to alarms when emergency mode is active and an alarm is issued.
536 | © 2024.06
Description
Different feedback channels can be selected via fieldbus
network.
Different feedback channels can be selected via fieldbus
network.
Different feedback channels can be selected via fieldbus
network.
Parameter type:
Conversion index:
Change during operation:
NOTICE
NOTICE
Parameter Descriptions
Option
–
False
AU361182657213en-002101 / 130R0338