Danfoss VLT Aqua Drive FC 202 Programming Manual page 257

Programming Guide | VLT® Aqua Drive FC 202
9-70 Programming Set-up
Default value: [9] Active set-up 1
Setup:
All setups
Data type: Uint8
Select the setup to be programmed during operation.
Option Name
[0] Factory setup
[1] Set-up 1
[2] Set-up 2
[3] Set-up 3
[4] Set-up 4
[9]* Active set-up
9-71 PROFIBUS Save Data Value
Default value:
[0] Off
Setup: All setups
Data type:
Uint8
Parameter values changed via RS485 are not automatically stored in a non-volatile memory. Use this parameter to activate a function
that stores parameter values in the EEPROM non-volatile memory, so changed parameter values are retained at power-down.
Option Name
[0]* Off
[1] Store all setups
[2] Store all setups
9-72 PROFIBUSDriveReset
Default value: [0] No action
Setup:
1 setup
Data type: Uint8
Resets the VLT® PROFIBUS DP-V1 MCA 101 option only.
© 2024.06
Parameter type:
Conversion index:
Change during operation:
Description
Parameter type:
Conversion index:
Change during operation:
Description
Parameter type:
Conversion index:
Change during operation:
NOTICE
Parameter Descriptions
Option
–
True
Option
–
True
Option
–
False
AU361182657213en-002101 / 130R0338 | 257