Danfoss VLT Aqua Drive FC 202 Programming Manual page 511

Programming Guide | VLT® Aqua Drive FC 202
Option Name
[71] Start timer 4
[72] Start timer 5
[73] Start timer 6
[74] Start timer 7
[75] Start timer 8
[76] Start timer 9
[80] Sleep mode
[81] Derag
[82] Reset derag counter
[90] Set ECB bypass mode
[91] Set ECB drive mode
[100] Reset alarms
[101] Reset flow totalized volume counter
[102] Reset flow actual volume counter
23-02 OFF Time
Default value: Size related
Setup: 2 setups
Data type: TimeOfDayWoDate
Sets the OFF time for the desired action.
The drive has no back-up of the clock function. The set date/time resets to default (2000-01-01 00:00) after a power-down unless a
real-time clockmodule with back-up is installed. In parameter 0-79 Clock Fault, it is possible to program a warning if the clock has
not been set properly, for example after a power-down.
23-03 OFF Action
Default value: [1] No action
Setup: 2 setups
Data type: Uint8
Select the action during OFF time. See parameter 13-52 SL Controller Action for descriptions of the options.
Option Name
[1]* No action
[2] Select set-up 1
© 2024.06
Description
Parameter type:
Conversion index:
Change during operation:
NOTICE
Parameter type:
Conversion index:
Change during operation:
Description
Parameter Descriptions
Range, 0 - 0, Array [10]
0
True
Option, Array [10]
–
True
AU361182657213en-002101 / 130R0338 | 511