Danfoss VLT Aqua Drive FC 202 Programming Manual page 477

Programming Guide | VLT® Aqua Drive FC 202
Option Name
[105] Sensorless pressure
[200] Ext. closed loop 1
[201] Ext. closed loop 2
[202] Ext. closed loop 3
21-35 Ext. 2 Setpoint
Default value:
0 ExtPID2Unit
Setpoint: All setups
Data type: Int32
The setpoint reference is used in extended 2 closed loop. Ext. 1 setpoint is added to the value from the Ext. 1 reference source selected in
parameter 21-33 Ext. 2 Reference Source.
21-37 Ext. 2 Reference [Unit]
Default value:
0 ExtPID2Unit
Setup: All setups
Data type: Int32
Readout of the reference value for the closed-loop 2 controller.
21-38 Ext. 2 Feedback [Unit]
Default value: 0 ExtPID2Unit
Setup:
All setups
Data type: Int32
Readout of the feedback value for the closed-loop 2 controller.
21-39 Ext. 2 Output [%]
Default value:
0%
Setup: All setups
Data type: Int32
Readout of the output value for the closed-loop 2 controller.
© 2024.06
Description
Requires setup by VLT® Motion Control Tool MCT 10 with
sensorless plug-in.
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
AU361182657213en-002101 / 130R0338 |
Parameter Descriptions
Range, -999999.999 -
999999.999 Ext.PID1Unit
-3
True
Range, -999999.999 -
999999.999 Ext.PID2Unit
-3
True
Range, -999999.999 -
999999.999 Ext.PID1Unit
-3
True
Range, 0 - 100%
0
True
477