Danfoss VLT Aqua Drive FC 202 Programming Manual page 319

Programming Guide | VLT® Aqua Drive FC 202
Option Name
[43] OK key
[44] Reset key
[45] Left key
[46] Right key
[47] Up key
[48] Down key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL time-out 3
[71] SL time-out 4
[72] SL time-out 5
[73] SL time-out 6
[74] SL time-out 7
[75] Start command given
[76] Digital input X30/2
[77] Digital input X30/3
[78] Digital input X30/4
[80] No flow
[81] Dry pump
[82] End of curve
[83] Broken belt
[90] ECB drive mode
[91] ECB bypass mode
[92] ECB test mode
[93] Emergency mode
[94] RS Flipflop 0
[95] RS Flipflop 1
[96] RS Flipflop 2
[97] RS Flipflop 3
[98] RS Flipflop 4
[99] RS Flipflop 5
© 2024.06
Description
[OK] is pressed. Only available on the graphical LCP.
[Reset] is pressed. Only available on the graphical LCP.
[◄] is pressed. Only available on the graphical LCP.
[►] is pressed. Only available on the graphical LCP.
[▲] is pressed. Only available on the graphical LCP.
[▼] is pressed. Only available on the graphical LCP.
Use the result of comparator 4.
Use the result of comparator 5.
Use the result of logic rule 4.
Use the result of logic rule 5.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
AU361182657213en-002101 / 130R0338 |
Parameter Descriptions
319