Danfoss VLT Aqua Drive FC 202 Programming Manual page 306

Programming Guide | VLT® Aqua Drive FC 202
Option Name
[248] Actual vol in trillions
[249] Therm. sensor temp.
13-11 Comparator Operator
Default value:
–
Setup: 2 setups
Data type:
Uint8
Select the operator to be used in the comparison. This is an array parameter containing comparator operators 0–5.
Option Name
[0] <
≂ (equal)
[1]
[2] >
[5] TRUE longer than..
[6] FALSE longerthan..
[7] TRUE shorter than..
[8] FALSE shorter than..
13-12 Comparator Value
Default value: Size related
306 | © 2024.06
Description
Parameter type:
Conversion index:
Change during operation:
Description
NOTICE
If [20] Alarm number or [21] Warning number is selected
in parameter 3-10 Comparator Operand, [0] < cannot be
selected in this parameter.
The result of the evaluation is true when the variable selected in
parameter 13-10 Comparator Operand is smaller than the fixed
value in parameter 13-12 Comparator Value. The result is false if
the variable selected in parameter 13-10 Comparator Operand
is greater than the fixed value in parameter 13-12 Comparator
Value.
The result of the evaluation is true when the variable selected in
parameter 13-10 Comparator Operand is approximately equal to
the fixed value in parameter 13-12 Comparator Value.
NOTICE
If [20] Alarm number or [21] Warning number is selected
in parameter 3-10 Comparator Operand, [2] > cannot be
selected in this parameter.
Inverse logic of option [0] <.
Parameter type:
Parameter Descriptions
Option, Array [10]
–
True
Range, -10000.000 - 100000,
Array [10]
AU361182657213en-002101 / 130R0338