Digital Control F2 DCI DigiGuide User Manual page 58

STEP 6 OF 10
When the noise bars
appear, walk the intended
drill path to find the two
locations with the highest
levels of noise, then return
to one of those locations
and scan again.
STEP 7 OF 10
band with the least noise *
Toggle to the
assign it as the Up band.
Before assigning the down band, pair the Up band to the
transmitter. Otherwise, rescanning will erase the current
frequencies.
STEP 8 OF 10
Move to the other location
with high noise, return to
Frequency Optimization,
and scan again.
DIGITAL CONTROL, INC
DIGITRAK FALCON F2 TOP TOGGLE
, click to select, then click again to
USER MANUAL
DCI DigiGuide 05.18.2024
58