Transmitter Setup - Digital Control F2 DCI DigiGuide User Manual

STEP 3 OF 5
Pull the trigger to turn on the locator.
STEP 4 OF 5
Click to confirm you've read the manual.
STEP 5 OF 5
Click again to continue.

TRANSMITTER SETUP

STEP 1 OF 3
Your transmitter comes with
two battery contact springs
and one battery cap tool.
STEP 2 OF 3
Insert batteries positive terminal first.
Install one spring between C-cell batteries to help prevent chatter.
Alkaline batteries are not sufficient for High Power Mode. The
locator will display a warning.
Do not use a spring with a SuperCell.
The transmitter is powered once batteries are inserted and the cap is
installed.
DIGITAL CONTROL, INC
DIGITRAK FALCON F2 TOP TOGGLE USER MANUAL
DCI DigiGuide 05.18.2024
16