Digital Control F2 DCI DigiGuide User Manual page 23

DIGITRAK FALCON F2 TOP TOGGLE USER MANUAL
DCI DigiGuide 05.18.2024
PAIR
STEP 1 OF 4
Pairing sends the frequencies you selected to the transmitter. Pair a
transmitter immediately after scanning and picking bands.
To pair at any other time,
from the Main menu, select
Transmitter/FO menu,
Frequency optimization, and
continue.
STEP 2 OF 4
Insert battery(ies) positive terminal first and install the battery cap to power
on the transmitter.
The FO noise bars will spike when the transmitter is powered on.
STEP 3 OF 4
Align the transmitter so its IR port is within 2 in (5 cm) of and facing the round
IR port on the front of the locator.
23
DIGITAL CONTROL, INC