Digital Control F2 DCI DigiGuide User Manual page 36

STEP 2 OF 5
Observe signal strength drop after drill operator completes a roll sequence to
change bands.
When using a wideband transmitter and the 10-2-7 roll
sequence, transmitter data will disappear after a successful
band change.
STEP 3 OF 5
From the Locate screen, hold toggle right to open the Band Selection
shortcut menu.
STEP 4 OF 5
Toggle to and select the transmitter band without the X in the box (in this
case, B34).
DIGITAL CONTROL, INC
DIGITRAK FALCON F2 TOP TOGGLE USER MANUAL
DCI DigiGuide 05.18.2024
36