Download Print this page

Digital Control F2 DCI DigiGuide User Manual page 17

Advertisement

DIGITRAK FALCON F2 TOP TOGGLE
USER MANUAL
DCI DigiGuide
05.18.2024
STEP 3 OF 3
The transmitter is powered once batteries or battery adapter is inserted and
the cap is installed.
SET HEIGHT-ABOVE-GROUND
STEP 1 OF 7
Stuff You Should Know
Use Height-Above-Ground (HAG) to set a height measurement on the locator
so you don't have to put it on the ground for a depth reading.
Raising the locator above the ground also provides separation from
underground interference that might otherwise reduce the transmitter's
range or cause variable readings.
STEP 2 OF 7
Hold the locator at your side as if you were holding a suitcase.
STEP 3 OF 7
Measure the distance between the ground and the bottom of the locator
using a tape measure.
STEP 4 OF 7
From the Main menu, select
HAG.
17
DIGITAL CONTROL, INC

Advertisement

loading
Need help?

Need help?

Do you have a question about the F2 DCI DigiGuide and is the answer not in the manual?