Digital Control F2 DCI DigiGuide User Manual page 26

STEP 6 OF 6
Select Exit to return to the
Locate Mode screen, where
you will see clock, pitch, and
signal strength.
CALIBRATE, CHANGE BANDS
STEP 1 OF 4
To change the transmitter to the Down band, remove the batteries from the
transmitter and observe data disappear from the locator.
There are other methods to change transmitter bands. See
Advanced Topics.
STEP 2 OF 4
While holding the transmitter vertical with the index cap end pointing down,
insert the batteries and reinstall the battery cap to power on the transmitter
in the Down band.
DIGITAL CONTROL, INC
DIGITRAK FALCON F2 TOP TOGGLE USER MANUAL
DCI DigiGuide 05.18.2024
26