Digital Control F2 DCI DigiGuide User Manual page 54

Use it to distance the locator from rebar that is causing signal interference
and to drill where walkover locating is not possible.
Target Steering is typically only used on a straight drill path under level
ground, not a curved path, with terrain changes, or to correct a significantly
off-course bore.
The maximum distance the locator can be placed ahead of the drill head for
Target Steering is 10.7 m.
Within this range, starting with the drill head approximately level, the
maximum depth and pitch changes are approximately 1.2 m and 14%,
respectively.
Beyond this distance, depth information becomes less accurate.
Data and left / right steering is usable for the entire range of the transmitter.
Any Height-Above-Ground (HAG) setting is ignored by the locator
when Target Steering is used.
Target Steering is not supported by the Falcon Compact Display.
STEP 2 OF 5
Toggle up from the Locate Mode screen to switch to Target Steering menu.
DIGITAL CONTROL, INC
DIGITRAK FALCON F2 TOP TOGGLE USER MANUAL
DCI DigiGuide 05.18.2024
54