Digital Control F2 DCI DigiGuide User Manual page 47

Warning tones: Three double beeps (Beep-beep, Beep-beep, Beep-beep) for
every 4°C increase.
Cooling is critical to avoid irreversible damage.
STEP 5 OF 6
Tx temp: 60°C and above
(icon flashing)
Warning tones: Three double beeps (Beep-beep, Beep-beep, Beep-beep) for
every 20 seconds on the locator and 5 seconds on the remote display.
The transmitter has been exposed to dangerous drilling
conditions. Temperatures above 85°C may cause irreversible
damage to the transmitter.
STEP 6 OF 6
The transmitter records the maximum temperature that it has been exposed
to. Use the Transmitter Info screen to view this information. See the "Get
Transmitter Info" article for steps.
V2 TRANSMITTERS MULTIPOWER MODE INTRODUCTION
V2 transmitters have three power modes to balance signal strength and
battery life. V2 transmitters are etched with a "V2" on the stainless battery
compartment (not on the label) and have a multipower mode sticker around
the IR port.
DIGITAL CONTROL, INC
DIGITRAK FALCON F2 TOP TOGGLE USER MANUAL
DCI DigiGuide 05.18.2024
47