Omron VARISPEED E7 User Manual page 118

Param-
eter Name
Number
Disables or enables the bi-direc-
Bi-directional tional capabilities of the speed
b3-14 speed search search function.
selection 0: Disabled
1: Enabled
Timer Function: b4
Param-
eter Name
Number
Sets the timer function output ON-
delay time (dead time) for the timer
Timer function
b4-01 function input.
ON-delay time
Enabled when the timer function is
set in H1-
Sets the timer function output
OFF-delay time (dead band) for the
Timer function
b4-02 timer function input.
OFF-delay time
Enabled when a timer function is
set in H1-
PI Control: b5
Param-
eter Name
Number
0: Disabled
PI control mode 1: Enabled
b5-01
selection 3: PI control enabled (frequency
Sets the proportional gain of the PI
Proportional (P)
b5-02 controller. P control is not per-
gain
formed when set 0.00.
Sets the integral time of the PI con-
b5-03 Integral (I) time troller. I control is not performed
when set to 0.0 sec.
Sets the I control limit as a percent-
b5-04 Integral (I) limit age of the maximum output fre-
quency.
Sets the limit after PI control as a
b5-06 PI limit percentage of the maximum output
frequency.
Sets the offset after PI control as a
b5-07 PI offset percentage of the maximum output
frequency.
Sets the time constant for low pass
PI delay time
b5-08 filter of the PI control output.
constant
Usually not necessary to set.
Selects forward/reverse direction
PI output charac- for PI output.
b5-09
teristics selection 0: PI output is forward.
1: PI output is reversed.
b5-10 PI output gain Sets output gain.
Description
Description
and H2- .
and H2-
Description
reference + PI output)
Change
Setting Factory during Access
Range Setting Opera- Level
tion
0 or 1 1 No
Change
Setting Factory during Access
Range Setting Opera- Level
tion
0.0 to
0.0 sec. No A
3000.0
0.0 to
0.0 sec. No A
3000.0
Change
Setting Factory during Access
Range Setting Opera- Level
tion
0, 1, 3 0 No Q
0.00
to 1.00 Yes
A
25.00
0.0 to
1.0 sec. Yes
A
360.0
0.0 to
100.0% Yes A
100.0
0.0 to
100.0% Yes A
100.0
-100.0
to 0.0% Yes A
+100.0
0.00 to 0.00
Yes A
10.00 sec.
0 or 1 0 No A
0.0 to
1.0 No A
25.0
User Parameter Tables
MEMO-
BUS Page
Register
A 19EH 6-39
MEMO-
BUS Page
Register
1A3H 6-86
1A4H 6-86
MEMO-
BUS Page
Register
1A5H 6-87
*1
1A6H 6-87
*1
1A7H 6-87
1A8H 6-87
1AAH 6-87
1ABH 6-87
1ACH 6-87
1ADH 6-87
1AEH 6-87
5-11