Confirmations Upon Delivery; Checks; Nameplate Information - Omron VARISPEED E7 User Manual

Confirmations upon Delivery

Checks

Check the following items as soon as the Inverter is delivered.
Has the correct Inverter model been delivered?
Is the Inverter damaged in any way?
Are any screws or other components loose?
Additionally check that following parts are delivered in the package with the IP54 inverter:
If any irregularities in the above items are found, contact the agency from which the Inverter was purchased or
your Omron Yaskawa Motion Control representative immediately.

Nameplate Information

There is a nameplate attached to the side of each Inverter. The nameplate shows the model number, specifica-
tions, lot number, serial number, and other information on the Inverter.
Example Nameplate
The following nameplate is an example for a standard European Inverter: 3-phase, 400 VAC, 0.55 kW,
NEMA 1 / IP20 standards
Inverter model
Input specifications
Output specifications
Lot number
Serial number
1-4
Table 1.2 Checks upon delivery
Item
Check the model number on the nameplate on the side of the Inverter.
Inspect the entire exterior of the Inverter to see if there are any
scratches or other damage resulting from shipping.
Use a screwdriver or other tools to check for tightness.
Table 1.3 Additional Deliveries with IP54 Inverters
Part Name
Cable Gland (for Input)
Cable Gland (for Motor Output)
Cable Gland (for Control)
Cable Gland (for Fieldbus)
Door Key
Blind Plug (Control Cable Entry)
Blind Plug (Fieldbus Cable Entry)
MODEL: CIMR-E7Z40P4
OUTPUT: AC3PH 0-480V 0-200Hz
Fig 1.1 Nameplate Example
Method
Qty.
1
1
1
1
1
1
1
SPEC: 40P41A
1.8A 1.4kVA
Inverter
specifications
Mass
Software Number