Digital Operator Functions; Setting Digital Operator Functions - Omron VARISPEED E7 User Manual

Digital Operator Functions

Setting Digital Operator Functions

Related Parameters
Parameter
Number
Monitor Selection (o1-01)
Using parameter o1-01 the third monitor item that is directly displayed in Drive Mode can be selected. This
parameter is only effective when the LED Digital Operator is used.
Monitor Display when the Power Supply is Turned ON (o1-02)
Using parameter o1-02 the monitor item (U1-
supply is turned ON can be selected.
6-110
*1
o1-01
Monitor selection
o1-02 Monitor selection after power up
o1-03 Digital operator display scaling
o1-09
Frequency reference display unit selection
o2-01
LOCAL/REMOTE key enable/disable
o2-02
STOP key during control circuit terminal operation
o2-03 User parameter initial value
o2-05 Frequency reference setting method selection
Operation selection when digital operator is discon-
o2-06
nected
o2-07 Cumulative operation time setting
o2-08 Cumulative operation time selection
o2-09 Initialize Mode
o2-10 Fan operation time setting
o2-12 Fault trace initialize
o2-14 kWh monitor initialize
o2-15
HAND Key function selection
*1. This parameter is effective only when the LED Digital Operator is used.
*2. Parameter function is only valid if a Digital Operator with LCD clear text display is used (LCD or HOA Digital Operator).
*3. This parameter is effective only when the LED or LCD Digital Operator is used.
*4. This parameter is effective only when the HOA operator JVOP-162 is used
Name
*2
*3
*3
*4
) that is displayed on the Digital Operator when the power
Change
Setting Factory during Access
Range Setting Opera- Level
tion
6 to 53 6 Yes A
1 to 4 1 Yes A
0 to
0 No A
39999
0 to 11 0 No A
0 or 1 1 No A
0 or 1 1 No A
0 to 2 0 No A
0 or 1 0 No A
0 or 1 0 No A
0 to
0 hrs No A
65535
0 or 1 0 No A
1 to 5 2 No A
0 to
0 hr. No A
65535
0 or 1 0 No A
0 or 1 0 No A
0 or 1 0 No A