Verify Mode - Omron VARISPEED E7 User Manual

Verify Mode

Verify mode is used to display any parameters that have been changed from their default settings, either by
programming or autotuning. If no parameter setting has been changed the display will show "NONE" with the
LED operator or "None Modified" with the LCD operator.
In Verify Mode the same procedures as in the programming modes can be used to change parameter settings.
Example Operations with LED Digital Operator
Fig 3.12 shows an example of operations in the Verify Mode. In that example following parameters have been
changed from their default settings: Reference Selection (b1-01), Acceleration Time 1 (c1-01), Input Voltage
Setting (E1-01) and Motor Rated Current (E2-01).
Mode Selection Display
MENU
Verify Mode
Fig 3.12 Operations in Verify Mode with LED Digital Operator
Monitor Display
Frequency Reference Selection
ESC
Acceleration Time 1
ESC
Input Voltage Setting
ESC
Motor Rated Current
ESC
Setting Display
Frequency Reference Selection
ESC
Acceleration Time 1
ESC
Input Voltage Setting
ESC
Motor Rated Current
ESC
Modes
3-15