Drive Options And Peripheral Devices; Drive Options And Peripheral Devices - Omron J1000 User Manual

8.2 Drive Options and Peripheral Devices

8.2

Drive Options and Peripheral Devices

The following table of peripheral devices lists the names of the various devices/options available for OYMC drives.
• Peripheral Device Selection: Refer to OYMC catalog for selection and part numbers.
• Peripheral Device Installation: Refer to option manual for option installation instructions.
Option
DC Reactor
AC Reactor
Braking Resistor
Remote LED Operator
USB/Copy Unit
RS-232C Serial Communication
Interface
Remote Operator Interface
Potentiometer Option
Heatsink External Mounting
Attachment
DIN Rail Attachment
NEMA Type 1 Kit
CX-Drive
RS-422/485 Serial
Communications Interface
150
Table 8.1 Available Peripheral Devices
Model Number
—
—
ERF-150WJ Series
Interface Options
JVOP-182
JVOP-181
SI-232/JC
SI-232/J
AI-V3/J
Mechanical Options
EZZ020568□
EZZ08122□
EZZ020564□
—
Communication Options
SI-485/J
Power Options
DC reactor to improve power factor
AC reactor to improve power factor
3% ED, 150 W braking resistor
Remote operator with LED display and copy function;
Cable length max. 3 m
Allows the user to copy and verify parameter settings
between drives. Can also be used as adapter to connect
the drive to a PC USB port
Note: SI-232/JC option is required
RS232C communications interface to connect the drive
to a PC or the optional copy unit
RS232C communications interface for usage with the
external LED operator JVOP-182
Potentiometer option for setting the frequency reference
directly at the drive
Installation kit for mounting the drive with the heatsink
outside of the panel (side-by-side mounting possible)
Installation kit for mounting the drive on a DIN rail
Parts to make the drive conform to NEMA Type 1
enclosure
Others
PC tool for drive setup and parameter management
Interface for RS-422/485 communications using the
MEMOBUS/Modbus RTU protocol
SIEP C710606 33A OYMC AC Drive – J1000 User Manual
Description