Compact general purpose inverter 200 v class three-phase input 0.1 to 0.4 kw 200 v class single-phase input 0.1 to 1.5 kw 400 v class three-phase input 0.2 to 4.0 kw (231 pages)
Mx2 series 200 v class three-phase input 0.1 to 15 kw 200 v class single-phase input 0.1 to 2.2 kw 400 v class three-phase input 0.4 to 15 kw (419 pages)
CX-Drive MCCB CX-One AC reactor Remote operator LCD 5 lines remote extension cable operator Filter DC reactor Choke Output reactor Motor Ground * Only needed for 3 phase 200 V or to comply C1 on 3 phase 400 V models...
Specifications Type designation J X A B 0 0 2 - E F JX series F: Built-in EMC Filter E: Europe standard A: Standard specs Max. applicable motor output Voltage: 002: 0,2 kW B: Single-phase 200 VAC Three-phase 200 VAC...
Page 4
Three-phase A4022 400 V A4040 A4055 167.5 77.5 A4075 Rasmi footprint Filters Filter only needed by the 1-phase 200 V or 3-phase 400 V to comply with C1 EMC class. Dimensions Weight Rasmi model AX-FIJ1006-RE 1x200 V AX-FIJ1010-RE AX-FIJ1026-RE AX-FIJ2006-RE...
Main circuit power supply input Used to connect line power to the drive. R/L1, S/L2, T/N/L3 Drives with single-phase 200 V input power use only terminals R/L1 and N (T/L3), terminal S/L2 is not available for these units Inverter output...
External power supply terminal for input signal (input) ...At sink logic Input power supply 24 VDC ±10% Internal power supply output terminal for input signal (output) ...At source logic Internal 24 VDC 24 VDC internal power supply 24 VDC ±10% 30 mA...
Page 8
Input AC Reactor AC reactor Power supply MCCB R/L1 S/L2 T/L3 3 phase 200 V class 400 V class Max. applicable Current value Inductance Max. applicable Current value Inductance Reference Reference motor output kW motor output kW 0.1 to 1.5 AX-RAI02800080-DE 0.4 to 1.5...
Filter Choke DC reactor Motor Output reactor Ground * Only needed for 3 phase 200 V or to comply C1 on 3 phase 400 V models Specifications Model Voltage class Max. applicable motor output kW Rated output current (A) Standard...
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. Cat. No. I110E-EN-01C...