File Operations; Overview - Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual

2-9

File Operations

2-9-1

Overview

2-9 File Operations
2-9-1 Overview
The following files can be saved and read by the CX-Integrator.
File name
Project files
Network
configuration
files
Component
parameter
files
Data link
files
FINS local routing table files
FINS network routing table files
Note:
2-56
File name
extension
.cin
Network structure .npf
files
Controller Link .csv
node files
DeviceNet device .dvf
parameter files
Component .xml
parameter files
Controller Link .cl2
data link table files
(.cl2)
SYSMAC LINK .sl3
data link table files
.rtg
.rxg
.rt3
.rx3
A project file that contains a CompoNet Network cannot be used with CX-Integrator
version 2.1 or lower. Upgrade to CX-Integrator version 2.2 or higher.
Contents
Connection information to the Relay
PLC
Overall network configuration of the
target PLC including parameters
(See note.)
DeviceNet configuration of the
target PLC including parameters
Note: Each file contains only one
network.
Network configuration for Controller
Link networks connected directly to
the target PLC
Parameters for individual DeviceNet
devices (master or slave)
Parameters for all components
except for DeviceNet devices
Note: These files do not include
Temperature Controller
information.
Controller Link user-set data link
tables
SYSMAC LINK user-set data link
tables
Routing tables of the target PLC
Note: The rtg files are compatible
with the earlier file format, and
up to 20 relay routing tables
can be registered.
Routing tables for all PLCs on the
networks to which the target PLC
belongs
Note: The rt3 files are compatible
with the earlier file format, and
up to 20 relay routing tables
can be registered.
Storage location
when downloaded
---
All DeviceNet
slaves on the
network
---
All DeviceNet
slaves
All components
CPU Bus Unit
setup area in the
parameter area of
the CPU Unit
CPU Bus Unit
setup area in the
parameter area of
the CPU Unit
Parameter area in
the CPU Unit
Parameter area in
the CPU Unit