Checking And Correcting Communications Unit Errors - Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual

2-3 Uploading Network Configurations and Checking for Communications Unit Errors
3. Select the name of the PLC to remain in the Network Configuration Windows (here,
PLC3) and click the OK Button.
The System Overview Tab Page will appear as follows:
The PLCs can also be combined by selecting the two networks on the System Over-
view, right-clicking, and selecting Combine two PLCs.
2-3-3

Checking and Correcting Communications Unit Errors

Checking a Communications Unit's Status and Errors
Right-click the target PLC in the Network Configuration Window and select Status/Error
of Communication Unit from the pop-up menu.
The PLC Unit Status Dialog Box will be displayed. In this example, a Controller Link Unit
is selected.
Note: The Communications Unit's status and error information can be saved as a CSV file by
2-3-3 Checking and Correcting Communications Unit Errors
clicking the Save Button, so the Communications Unit's status at that point can be read
from the CSV file later and analyzed.
2-31