Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 198

4-2 User Interface Overview
4-2-2 Datalink Component
Toolbar
(1) (2) (3) (4)
No.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
4-6
(5) (6) (7) (8) (9) (10) (11)
Icon
New
Show All Network Nodes
Open
Controller Link
SYSMAC LINK
Save
Toggle Network/Single
Node Operation
Transfer to PLC
Transfer from PLC
Delete
Verify Node
Data Link Operation/Status
Automatic Data Link Setup
Validate Table
Wizard
Add Source Link
Add Destination
Set Source or Destination
Link Area Properties
Delete Link Destination
Service Area
Zoom In/Zoom Out/Zoom
Original
Print
Help
(12) (13) (14) (15)
Function
Creates new data link tables.
Shows all nodes in the network.
Opens a data link tables, Files with any of the file name
extensions shown below can be opened.
When a file is opened, the proper editor starts up.
.cl2 – CX-Net Controller Link/CLKSS data link tables
.cl3 – CX-Net Controller Link data link tables
.clk – CLKSS data link tables
.csv – CX-Net Controller Link data link tables
(tab-delineated text file)
.sl3 – SYSMAC LINK data link tables
.slk – SYSMAC LINK data link tables for SYSMAC
Support Software
.csv – SYSMAC LINK data link tables (tab-delineated
text file)
Saves the data link tables that are being edited.
Specifies either all nodes or a single node for data
transfers.
Downloads online data link tables from the computer to a
PLC.
Uploads online data link tables to the computer.
Deletes data link tables.
Compares data link tables generated by CX-Integrator with
data link tables stored in the PLC. If they do not match, an
error dialog box is displayed.
Displays the operation and data link status of manually set
data links.
Sets parameters for automatically set data links, and
transfers them to the startup node.
Checks data link tables.
Executes the Datalink Wizard.
Adds a node to the data links.
Adds the receive area of a participating node to the data
links.
Displays the Node Settings dialog box. This dialog box is
used to modify the node properties.
Deletes nodes selected in the Data Link Configuration
Window, or deletes a receive area.
Zooms the Data Link Configuration Window in or out, or
returns it to the initial scale.
Prints data link information.
Displays help.
(16) (17) (18) (19) (20)