Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 86

1-6 Menus
1-6-2 Pop-up Menus
DeviceNet Networks
Sub-menu/command
Parameter
Monitor
Reset
Maintenance information
Resister to another
component
Export
Cut
Copy
Paste
Delete
Change Node Address
Change Device Comment
I/O Comment
Start a
dedicated tool
Properties
1-58
Wizard Enables setting device parameters with a
wizard (for supported devices only).
Edit Enables editing device parameters.
Load Loads parameters from a device parameter
file.
Save Saves device parameters to a file.
Upload Uploads device parameters from a device on
the network.
Download Downloads device parameters to a device on
the network.
Compare Compare device parameters with the
parameters in a device on the network.
Enables monitoring a device on the network
(supported devices only).
Resets a device on the network.
Displays the maintenance information for the
selected device.
Registers the current device to the scan list in
another device.
Exports I/O comments in CSV format
Comment list
(supported devices only).
Scan list information is output in the
NX-Server DDE
Setup File NX-Server DDE Edition file format.
Scan list information is output in the
NX-Server ONC
Setup File NX-Server ONC Edition file format.
ONC DRM Unit Scan list information is output in the ONC
Master parameter file format.
Setup File
Cuts the selected device.
Copies the selected device.
Pastes the device on the clipboard.
Deletes the selected device.
Changes the selected device's node address. OK
Changes the selected device's description
(comment).
Enables editing I/O comments.
Start with Starts the associated application while
Settings keeping the PLC model settings.
Inherited
Start Only Starts the associated application.
Displays the properties of the device.
Description Offline Online
OK OK
OK OK
OK OK
OK OK
No OK
No OK
No OK
No OK
No OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK No
OK No
OK No
OK No
No
OK No
OK No
OK OK
OK OK
OK OK