Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 121

2-3 Uploading Network Configurations and Checking for Communications Unit Errors
1. Upload network N1 (Ethernet)
from PLC1.
Here, for example, PLC4 can be eliminated and combined with PLC3 as the same
PLC. The procedure is as follows:
1. Go offline after uploading the networks, right-click PLC3 in network N1 (Ethernet),
and select Combine two PLCs.
PLC1
CJ1H-CPU67H
N1 (Ethernet), network address: 001
PLC3
CS1H-CPU65H
Personal computer
(CX-Integrator)
2. Upload network N2 (Controller Link)
from PLC2.
N2 (Controller Link), network address: 002
PLC4
CS1H-CPU65H
Example: The same PLC is registered as two different PLCs in the Network
Configuration Windows:
• As PLC3 in the N1 (Ethernet) network
• As PLC4 in the N2 (Controller Link) network
2-3-2 Procedure
PLC2
CS1H-CPU67H
2-29