Master Unit Monitor Window - Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual

7-4 Component Monitor

7-4-2 Master Unit Monitor Window

7-4-2 Master Unit Monitor Window
Various types of monitoring functions are supported to enable quickly isolating errors
that occur in connected devices and on the network, and to enable rapid recovery from
errors and predictive maintenance.
This section describes the information that can be monitored for OMRON Master Units.
Network Status Tab Page
The Network Status Tab Page displays the network configuration information
contained in the Master Unit.
The connected Slave Units, and Repeater Units are shown in the Master Unit tree.
Information on each Unit (icon, node address, slave type, and model name) is
displayed, and Units with errors are displayed in red. Errors can be checked on the
Slave Status Tab Page.
7-8