Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 348

7-6 Editing Master Unit Parameters
7-6-2 Editing the Registration Table
5. Select the Edit the Registration Table Check Box on the General Tab Page.
6. Select the Slave Units to register from the Unregistered Device List and click the
7. Click the Apply Button. The Registration Table will be saved.
8. Click the Transfer [PC to Unit] Button on the General Tab Page for the Master
7-24
The Registration Table Tab Page will be displayed, and the Slave Units in the
Network Configuration Window will be displayed in the Unregistered Device List.
Down Arrow Button (
address, and then displayed in the Registered Device List.
To unregister a Slave Unit, select the Slave Unit to be unregistered from the
Registered Device List, and click the Up Arrow Button (
have been unregistered will be displayed in the Unregistered Device List.
Unit to download the settings to the components.
). The Slave Units will be registered in order of node
). Slave Units that