Basic Operations; Connecting Via Ethernet; Starting - Omron WS02-NCTC1-E - 07-2001 Operation Manual

Basic Operations

Recommended Cables
2-2-2

Connecting via Ethernet

Ethernet Units
2-3

Basic Operations

2-3-1

Starting

1,2,3...
18
Fujikura Ltd.
UL2464 AWG28 × 5P IFS-RVV-SB (UL item)
AWG28 × 5P IFVV-SB (non-UL item)
Hitachi Cable, Ltd.
UL2464-SB (MA) 5P × 28AWG (7/0.127) (UL item)
CO-MA-VV-SB 5P × 28AWG (7/0.127) (non-UL item)
Use FinsGateway Version 3's Ethernet driver to connect to the PC via Ether-
net.
Support Software
(on IBM PC/AT or
compatible computer)
Note Connection via Ethernet is not possible if the Ethernet driver for FinsGateway
Version 3 is not installed.
Use one of the following Ethernet Units.
Model
number
CS1W-ETN01 CS Series
CS1W-ETN11
CJ1W-ETN11 CJ Series
Descriptions of CX-Position's basic operations is given below.
1. Click Start, and move the cursor to Program/OMRON/CX-Position.
2. Click CX-Position.
NC Unit
Ethernet Unit
Ethernet network
Ethernet board
Applicable Unit
PC classification
CPU Bus Unit Ethernet
Section 2-3
NC Unit
Ethernet Unit
Communications FinsGateway
path communications
Ethernet driver
10BASE-5
Ethernet
10BASE-T
driver