Omron CX-INTEGRATOR V2 - 12-2009 Operation Manual page 79

Main
Sub-menu/command
menu
Network Parameter
Move to upper network
Move to lower network
Rename Network
Change Network Address
Update Maintenance Information
Compo- Parameter
nent
Monitor
Reset
Start Special
Application
Edit Enables editing the parameters of
the selected Controller Link
network.
Write Writes the parameters of the
selected component to a
component parameter file.
Read Reads the parameters from a
component parameter file to a
selected component.
Transfer [PC to Downloads all component
Network] parameters or network parameters
from the virtual network on the
computer to the actual network.
Transfer Uploads the network configuration
[Network to PC] and all component parameters or
network parameters from the
actual network to the virtual
network on the computer.
Compare Compares the network
configuration and all component
parameters or network parameters
between the actual network and
the virtual network on the
computer.
Displays the next higher network
layer.
Displays the next lower network
layer.
Changes the network name.
Changes the network address.
Updates the device's maintenance
information.
Wizard Enables setting component
parameters with a wizard (for
supported components only).
Edit Enables editing the parameters of
the selected component.
Load Reads the parameters from a
component parameter file to a
selected component.
Save Saves the parameters of the
selected component to a
component parameter file.
Download Downloads the selected
component parameters to the
actual component.
Upload Uploads the selected component
parameters from the actual
component.
Compare Compares the selected
component parameters with those
in the actual component.
Enables monitoring the selected
component (for supported
components only).
Resets the selected component.
Start with Starts the associated Support
Settings Inherited Software for the selected
component or PLC, keeping the
CX-Integrator settings.
Start Only Starts the associated Support
Software for the selected
component or PLC, without
keeping the CX-Integrator
settings.
Description
All networks
DeviceNet
only
DeviceNet
only
All networks
DeviceNet
only
DeviceNet
only
All networks
DeviceNet
and
CompoNet
DeviceNet
only
All networks
1-6 Menus
1-6-1 Menus
Network
Offline Online
type
OK OK
OK OK
OK No
No OK
No OK
No OK
No OK
No OK
OK No
OK No
No OK
OK OK
OK OK
OK OK
OK OK
No OK
No OK
No OK
No OK
No OK
No OK
OK OK
1-51