Table of Contents
Advertisement
1-4-2
Connecting CJ-series CJ2 CPU Units, CP-series PLCs and NSJ-series Controllers
4. Ignore the following dialog box if it is displayed and click the Continue Anyway
Button.
5. The following dialog box will be displayed if the installation is completed normally.
Click the Finish Button.
Installing a Specified USB Driver
If the USB driver cannot be installed automatically, use the following procedure to
install it.
Windows Vista
1. Turn ON the power supply to the PLC and connect the peripheral USB port on the
PLC to the personal computer using a USB cable.
1-4
PLC Connecting Cables
Using Commercially Available USB Cable
1-25
Advertisement
Table of Contents
