Table of Contents
Advertisement
3-2 Setting the Routing Tables
3-2-6 Saving Routing Tables
3-2-6
Saving Routing Tables
Use the following procedure to save the created FINS local routing tables. The FINS
local routing tables are saved in a file with the ".rtg" filename extension or the ".rxg"
filename extension (see note).
1. Select File – Save Local Routing Table File in the PLC Routing Table Window.
The Save As Dialog Box will be displayed.
2. Input the desired filename ("Sample" is input in this example), specify the directory
where the file will be saved, and click the Save Button.
The file will be saved with either the ".rtg" or ".rxg" filename extension attached.
(The file is "Sample.rtg" in this example.)
Note: The file's filename extension depends on the relay network's registration mode.
3-2-7
Reading Routing Tables
Use the following procedure to read FINS local routing tables that were previously
saved.
1. Select File – Open Local Routing Table File in the PLC Routing Table Window.
The Open Dialog Box will be displayed.
2. Select a FINS local routing table file to read (with a ".rtg" or ".rxg" filename
extension, see note) and click the Open Button.
The FINS local routing tables will be read.
Once the file is read, the PLC can be connected online and the file can be
transferred to the PLC.
Note: The ".rxg" files are supported by CX-Integrator Version 2.1 or higher.
3-2-8
Verifying Routing Tables
Use the following procedure to compare routing tables created in the CX-Integrator to
the routing tables in the PLC.
1. Select Options – Verify Routing Table in the PLC Routing Table Window.
The results of the verification will be displayed.
Click the OK Button to display detailed verification results.
3-26
• Standard mode: *.rtg
• Extended mode: *rxg
Normal Result
Local Network Table Results
Error Detected
Relay Network Table Results
Advertisement
Table of Contents
