Optional Settings - Omron CX-INTEGRATOR - V2.3 REV 02-2009 Operation Manual

7-2 Basic Procedures

7-2-2 Optional Settings

7-2-2 Optional Settings
Use the following steps to set the parameters according to the application or network
environment.
Set and transfer Master Unit parameters.
Master Unit parameter settings
Editing the Registration Table
Editing the Software Table
Set and transfer Slave parameters.
Slave Parameter Setting
7-4
Step Section
Refer to 7-6-1 Master Unit
Parameter Settings.
Refer to 7-6-2 Editing the
Registration Table.
Refer to 7-6-3 Editing the Software
Table.
Refer to 7-7-1 Setting Slave
Parameters.