Pop-Up Menus - Omron CX-INTEGRATOR - V2.3 REV 02-2009 Operation Manual

1-6 Menus
1-6-2

Pop-up Menus

1-6-2 Pop-up Menus
Online Connection Information Window
Pop-up Menu for the Relay PLC's Communications Settings
The following pop-up menu will be displayed if you right-click the relay PLC's
communications settings line (starting with Offline) in the Online Connection
Information Window.
Pop-up menu item
Work Online
Auto Online
Edit Communication
Settings
Note: The following will be displayed when online.
Pop-up menu item
Offline
Pop-up Menu for Target PLC Online
Pop-up menu item
I/O table
Error Log
Mode Setting
Start Routing Table
Echoback test
between PLC nodes
1-54
Description
Connects to the relay PLC using the device
type settings on the computer.
For a serial connection, automatically
connects using the communications settings
in the PLC. (The device type settings of the
connected relay PLC will be uploaded.)
Used to change the device type settings of
the relay PLC on the computer. The Change
PLC Dialog Box is displayed.
Description
Closes the connect and places the
CX-Integrator offline.
Description
Starts the I/O Table Component.
Starts the PLC Error Component.
Changes the operating mode of the CPU Unit
Starts the Routing Table Component.
Starts the echoback test for checking the
communications status of the network.
Offline Online
OK No
OK No
OK No
Offline Online
No OK
Offline Online
No OK
No OK
No OK
No OK
No OK