Comparing Component Parameters - Omron CX-INTEGRATOR - V2.3 REV 02-2009 Operation Manual

7-5 Uploading, Downloading, and Comparing Component Parameters

7-5-2 Comparing Component Parameters

4. Click the Yes Button.
Uploading Using the Network Configuration Window
Select the Network structure and Parameters for each component Option as the data
to be uploaded in 7-3-1Uploading the Network Structure to the Computer. The
component parameters will be uploaded to the computer.
7-5-2 Comparing Component Parameters
The Parameter Edit Dialog Box is used to compare parameters of components on the
network with component parameters that are stored in the CX-Integrator. Use the
following procedure to compare parameters.
1. Connect the CX-Integrator online, and then connect it to a CompoNet Network.
2. Select the components to compare from the Network Configuration Window.
3. Right-click and select Parameter - Edit from the menu.
4. Click the Compare Button located on the General Tab Page for the Master Unit
7-14
The parameter upload progress dialog box will be displayed, and the parameter
upload to the computer will begin.
or Slave Unit.
The compare progress dialog box will be displayed, and then the comparison
results will be displayed.