Omron CX-INTEGRATOR - V2.3 REV 02-2009 Operation Manual page 360

8-2
8-2-1 Communications with CompoWay/F Slaves through a PLC
A new CompoWay/F network is added
in the Workspace Window.
Note: With CX-Integrator 2.1 or higher, the network address of the CompoWay/F network
will be displayed when uploading the CompoWay/F network if it is registered in the
PLC's routing tables (uploaded CompoWay/F network address display function).
CompoWay/F Slaves Connected to a PLC
The CompoWay/F network
configuration is displayed in the
Network Configuration Window.
8-7