Table of Contents
Advertisement
Advanced Setting Dialog Box
Name
Slave Active Timer
Enable Waiting All
Slave Active
Function
Registration Table
Check Type
7-6 Editing Master Unit Parameters
7-6-1 Master Unit Parameter Settings
Sets the time to detect that registered Slave Units are participating in the
network, starting from the time that the power is turned ON or the Remote
I/O Communications Start Switch is turned ON. This setting is set when
changing the default setting. If the Enable Waiting All Slave Active
Function Check Box is also selected, this setting will be disabled.
When this option is selected, all registered Slave Units will start remote
I/O communications after joining the network.
Used to select the items to be checked from the Registration Table data.
Function
7-21
Advertisement
Table of Contents
