Table of Contents
Advertisement
A-2
EDS File Management
This section explains the EDS file management functions of the CX-Integrator.
A-2-1
Installing EDS Files
Tools - EDS File - Install
The CX-Integrator will support new devices if proper EDS files are installed. To install
the EDS file, use the following procedure.
1. Select EDS File and Install.
The following window will be displayed.
The device information will be displayed on the bottom of the window when the EDS
file is selected.
2. Select the EDS file to be installed and click the Open Button.
The EDS file will be added to the Hardware List.
If the EDS file already exists, the new EDS file will overwrite the previous one.
If the EDS files are different to each other in version, the new EDS file will be added
to the Hardware List as shown below.
A-2 EDS File Management
A-2-1 Installing EDS Files
A-5
Advertisement
Table of Contents
