Editing Ladder Programs
2-4-3
Changing Inputs, Outputs, and Settings
1,2,3...
Input positions for input and output bits can be changed by using the
mouse or cursor keys to move to the input or output position and then
use any of the following methods.
• Press the Enter Key.
• Double-click.
• Click the Insert Input or Insert Output Button on the Toolbar.
• Select Insert(I)/Contact (input bit)/Coil (output bit) from the
Menu Bar.
• Select Edit(E)/Edit(E) from the Menu Bar.
• Right-click and select Edit.
1.
For this example, double-click CPU unit output Q0.
2.
The Edit Output Dialog Box will be displayed.
Section 2-4
25