Screen Configuration
4-6-5 Saving Settings
1, 2, 3...
4-6-6 Deleting Registered Screens
1, 2, 3...
116
Detailed Settings
Select the Tag name, and then click the Details Button. The following dialog box
will be displayed.
Set the timing to display the
messages
After making the settings, click the OK Button.
Display is red for an occurrence, and black following recovery.
3. Complete the above settings, and then click the OK Button.
The alarm message will be registered, and the name of the screen you en-
tered will be displayed in the Screen Management Tree.
Save the screen configurations that you have set.
Note If setting or changing screen configurations, make sure to save the settings or
changes.
1. From the Settings Menu in the CRT Builder, select Save.
2. Click the OK Button.
To delete registered screens, perform the following operation.
1. In the CRT Builder's Screen Management Tree, click to select the screen
you want to delete.
2. From the CRT Builder Settings Menu, select Delete.
Section
Enter the alarm message. You can enter up
to 94 characters.
Click to select. Double-click to
omit Step 2 of the operation.
4-6