Removing The Cover And Bezel - Cisco CE-511 Hardware Installation Manual

Removing the Cover and Bezel

Warning
Step 1
Step 2
Step 3
OL-5756-01
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Hardware Options
This chapter provides basic instructions for installing hardware options in the
Content Engine. These instructions are intended for technicians who are
experienced with setting up Cisco Content Engine hardware.
This chapter contains the following topics:
Removing the Cover and Bezel, page 4-1
•
Installing Adapters, page 4-3
•
Working with Hard Disk Drives, page 4-12
•
Completing the Installation, page 4-16
•
Before working on a system that has an on/off switch, turn OFF the power and
unplug the power cord. Statement 1
Complete the following steps to remove the Content Engine cover:
Review the information in the
"Safety Guidelines" section on page
Power down the Content Engine and all attached devices. Disconnect the power
cord and all external cables.
Loosen the two captive screws (1) on the rear of the cover. (See
Cisco Content Engine 511 and 566 Hardware Installation Guide
C H A P T E R
"Safety Warnings" section on page
2-4.
4
2-1, and the
Figure 4-1.)
4-1