Table of Contents
Advertisement
Installing a CE-511 or CE-566 Unit
Align and insert the inner slide rails into the slide rail assemblies until they lock
Step 6
into place.
Slide the Content Engine into the rack until the Content Engine locks into place.
Step 7
Tighten the captive screw (labeled 1 in
Step 8
Content Engine to secure the Content Engine to the rack.
Figure 3-8
Attach the power cords and the Ethernet cables to the Content Engine.
Step 9
Because the Content Engine does not contain cable retention brackets or cable
strain relief brackets, you must first bundle the external cables before you
route them.
Cisco Content Engine 511 and 566 Hardware Installation Guide
3-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Inner Slide Rails
1
Chapter 3
Installing the Content Engine
Figure
3-8) on each side of the front of the
OL-5756-01
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the CE-511 and is the answer not in the manual?
Questions and answers