Communication Interface X1/X2 In System Modules - Danfoss iC7-Hybrid PROFINET Operating Manual

Operating Guide | iC7-Hybrid PROFINET
Figure 6: Communication Port X0, X1, and X2 Locations in FK06–FK08 Frames
FK09–FK10
SeeTech. Doc
for Info
45 24V ST X 1 X 2
46 S.INA+ MS NS
13 DI1 14 DI2 47 S.INB+ 48 S.FB+
15 DI/DO1 X 8
16 DI/DO2
17 DI3 45 GND
18 DI4 46 S.INA-
19 GND 47 S.IN B - 48 S.F B-
20 GND
31 A01 61 24V e xt
32 + 10V 62 GND
33 AI1
35 GND 34 AI2
WARN
1 COM REA DY
2 NO FAUL
3 NC
4 COM PUSH
5 NO
6 NC
Figure 7: Communication Port X0, X1, and X2 Locations in FK09–FK12 Frames

Communication Interface X1/X2 in System Modules

3.4
For systems that use system modules, the communication interface ports are located at the bottom facing side of the modular control
unit as shown in Figure 8.
Danfoss Drives Oy © 2024.04
X 0
X 1
X 2
X0 X1 X2
FK11–FK12
AQ481922002453en-000101 / 172K4283A |
19