Table of Contents
Advertisement
Field Name
Christie Pureformity
™
Color
Correction File
Warp File
4. Select Save.
Adding a channel for SDI input
Create a channel to store customized projector settings for input devices connected to the SDI port.
1. In the left navigation menu, select Channel Setup.
2. Select + Add Channel.
3. Complete these fields:
Field Name
Name
Input Type
Data Format
Scan Type
3D Sync Input Mode
CineLife+ User Guide
020-103073-10 Rev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
The color correction file associated with the channel.
Bypass (Default)
Warp file associated with the channel.
Bypass (Default)
Description
Channel name
Select the input signal sources from one of the following:
• SDI - 1
• SDI - 2
• SDI - 3
• SDI - 4
• SDI - Dual-Link (1,2)
• SDI - Dual-Link (3,4)
• SDI - Quad-Link (2SI)
• SDI - Quad-Link (SQ Div)
• SDI 3D LR (1,2)
• SDI 3D LR (3,4)
• SDI - Dual-Link 3D LR (1,2)(3,4)
Bit-depth, sampling format, and color space of the input signal are
automatically determined from the metadata carried in the source.
Auto (Default)
Determines the input scanning format. Select one of the following:
• Auto (Default)—The scanning format of the input signal (interlaced or
progressive) is automatically determined from the metadata carried in the
source or by measuring scanning parameters of the source.
• Progressive—Forces the input signal scanning format to progressive,
overriding any metadata in the input signal.
Specifies whether a specific frame of input data has left-eye or right-eye data.
Select one of the following:
Working with channels
73
Advertisement
Table of Contents
