Table of Contents
Advertisement
2. Upload the required upgrade package to a USB key or to the home/ftpuser directory on the
projector.
NTFS-formatted USB drives are not supported for this release.
3. If using the USB method, insert the USB key into the projector.
4. In the left navigation menu, select Service Setup > System Upgrade.
The available upgrade packages are displayed on screen.
5. Select to select the upgrade package from the list.
6. Select Upgrade.
7. To begin the upgrade, select Upgrade in the confirmation dialog.
The projector restarts automatically when the upgrade is complete.
CineLife+ User Guide
020-103073-10 Rev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Backing up, restoring, and upgrading files
104
Advertisement
Table of Contents
