How To Locate A Service Using The Property Connection Set - Leica DIGICAT 500i User Manual

6.3

How to Locate a Service Using the Property Connection Set

Using the Property
Connection Set
1. Connect the Property Connection Set to the Transmitter.
2. Connect the Property Connection Set to a live mains outlet. Ensure the switch on the
3. Switch the Transmitter on and select 33 kHz.
4. Trace the length of the service using the Locator set to the same frequency.
• The mains supply must be live and switched on for correct operation.
• Works best with 33 kHz.
DIGICAT 500i/550i, How to Use the Property Connection Set
3
mains is on.
A good signal output is indicated when the audible output from the Transmitter is
constant.
3
2
1
47